Holding Tanks
For use with trailers at sites that do not have sewer or septic tank
disposal as permitted by county and state health department regulations.
Plastic or fiberglass construction. Tanks can not be buried underground
as they may collapse due to the weight on the top section. Please refer
additional questions on local regulations to the appropriate permitting
authority.
Standard dimensions for holding tanks are:
| |
 |
140 Gallon
•
Outside dimensions: 48” x 48” x 14” deep
• Intakes: 3” PVC
• Pump out: 4” PVC w/plug |
 |
280 Gallon
•
Outside dimensions: 94” x 56” x 16” deep
• Intakes: 3” PVC
• Pump Out: 4” PVC w/plug |
| |
1000 Gallon
• please contact our sales department
for additional information.
|
Water Buffalo
A self-contained water tank system for use at remote sites that do not
have access to any water supply. This trailer must be empty when transported
between locations. The customer is responsible for acquiring water for
the tank at the site. This trailer has 2 – 500 gallon tanks but
recommended maximum capacity is 850 gallons. The pump system hooks up
to a 15 amp, 110 volt power supply provided by the customer.
|
